Posts: 49
Threads: 7
Joined: Apr 2011
05 Apr 11, 12:56PM
(This post was last modified: 13 Apr 11, 12:41PM by |LULZ|UmadBRO?.)
Whenever I start mt server, it does this
http://forum.cubers.net/thread-1742.html
*this is not my server, but it does the same thing
HELP!!!!!!!!!
Posts: 1,823
Threads: 20
Joined: Jun 2010
I remember someone else had this problem, but I don't remember how he fixed it :|
Posts: 49
Threads: 7
Joined: Apr 2011
Im also not sure if other people can see the server on the masterserver list. Its very difficult to solve these problems
Posts: 718
Threads: 23
Joined: Jun 2010
If it's your external ip, others can see it, generally
Posts: 2,136
Threads: 50
Joined: Jun 2010
The master server has had several registrations from your IP address (I guess you keep restarting it, to see if it's fixed), but only on three ports - 28763, 28456 and 28787, and these were not at similar times. The thread you linked to concerned actual server registrations, whereas it would seem that your duplicates are visible only to you.
Like Gibstick (and, as I said in IRC), I've seen this exact issue on here before, but I can't find it. If someone's bored enough to have a good search through old threads, that could be your first help. Is it possible you've altered the source at all?
Posts: 49
Threads: 7
Joined: Apr 2011
06 Apr 11, 12:40PM
(This post was last modified: 06 Apr 11, 06:11PM by jamz.)
The different ports are because I used restarted it using different ports to see if that worked. There are 20 different ports that appear on my list
Thanks for clearing up that I am the only one to see these duplicates though
http://forum.cubers.net/thread-597.html
THIS IS THE THREAD, BUT IT DOESNT TELL ME HOW TO FIX IT!!!!!!
Posts: 2,136
Threads: 50
Joined: Jun 2010
Well found! I would suggest PM'ing SpiRiT, but it seems he's disappeared from AC again. Since there weren't any hard solutions on that one, you'll be lucky if you get one here, but you never know; sometimes the right person just isn't paying attention at the right time.
Posts: 840
Threads: 10
Joined: Jun 2010
Posts: 586
Threads: 24
Joined: Jun 2010
It doesn't help if you run an outdated server - the last two registrations I see are for 1.1.0.3 servers, before that it was a (proper) 1.1.0.4. Please stick with the 1.1.0.4.
It would be interesting to see whether or not your config/servers.cfg contains any multiples for that IP (and the different ports you mentioned to boot) in it.
I can't see any duplicates in the list presented by the masterserver, there shouldn't be any. Could you please check your local config/servers.cfg directly when you re-encounter this problem - simply quit regularly and check the file. Thanks!
Posts: 49
Threads: 7
Joined: Apr 2011
07 Apr 11, 07:32AM
(This post was last modified: 09 Apr 11, 04:35PM by flowtron.)
Im going to have to bump this because I NEED HELP!!! lol
No duplicates of my ip are in the servers.cfg file.
Posts: 49
Threads: 7
Joined: Apr 2011
I have a problem EXACTLY the same as in this thread
http://forum.cubers.net/thread-597.html
Can anyone help? thanks
Posts: 1,823
Threads: 20
Joined: Jun 2010
09 Apr 11, 11:57AM
(This post was last modified: 09 Apr 11, 11:59AM by Gibstick.)
I understand how much you want to fix your problem, but there's no need to create multiple threads. I'll merge your old thread.
O hey, can you describe to us your exact portforward setup, or take a screenshot of it?
Posts: 481
Threads: 11
Joined: Jul 2010
09 Apr 11, 04:19PM
(This post was last modified: 09 Apr 11, 04:19PM by JGAN.)
(06 Apr 11, 12:40PM)|LULZ|UmadBRO? Wrote: There are 20 different ports that appear on my list
doesnt that kind of give it away? i would say you have an internal port forwarding problem, or some NAT settings f*cked up. what is your router model? like gibstick said, take a screenshot and host it at http://imageshack.us/
http://forum.cubers.net/thread-597.html <-i cant believe i wrote that ._.
Posts: 49
Threads: 7
Joined: Apr 2011
http://img851.imageshack.us/i/unled1zv.jpg/ this is my retarded belkin router. The model is F5D8236-4v1(01)
I hope this helps
Posts: 49
Threads: 7
Joined: Apr 2011
Has anyone looked at my settings yet ^^^
Posts: 377
Threads: 4
Joined: Jun 2010
Yeah, I had the same problem
I don't know why but your internal ip servers show up as well as your external
Posts: 49
Threads: 7
Joined: Apr 2011
Its my external IP that shows up multiple times. My LAN address only shows once
Posts: 1,436
Threads: 7
Joined: Jun 2010
Does the problem persist even after updating the list from the master server?
Posts: 951
Threads: 23
Joined: Jun 2010
11 Apr 11, 10:33PM
(This post was last modified: 11 Apr 11, 10:35PM by Viper.)
This happens to me as well. It would appear as though the MS is registering my server (obviously) so i see the server with my external IP and is showing the server as an LAN in my serverlist. It causes no harm so i don't exactly care. Maybe a bug idk?
Posts: 49
Threads: 7
Joined: Apr 2011
(11 Apr 11, 10:33PM)Viper Wrote: This happens to me as well. It would appear as though the MS is registering my server (obviously) so i see the server with my external IP and is showing the server as an LAN in my serverlist. It causes no harm so i don't exactly care. Maybe a bug idk?
In addition to the multiplying servers, other people cannot see it on the serverlist. My ports ARE forwarded correctly, as others can connect by using the commandline
Posts: 586
Threads: 24
Joined: Jun 2010
This sounds to me like faulty hardware. Some network device of yours - the card/chip in your PC, or the router - if possible try another machine to see if it happens on it too, then it'd be the router at fault.
You've not told us your OS yet, it would help give you more clear "do this"-type-of-comments if we knew if it's a linux, a Mac, Windows 98, Windows 2000, Windows XP or Windows Vista or Windows 7. If you're on a 32bit machine or a 64bit one.
I can definitely see only a regular amount of registrations from your IP, and thanks for using 1.1.0.4 :-)
Are you also sure you've not got some weird scripting that may be causing this!?
Trying a clean configuration (client!) may be insightful - I'd suggest simply passing it an alternative (new) game-home parameter (--home) .. or (temporarily!) removing both config/autoexec.cfg and config/saved.cfg.
Oh .. and please don't keep double-posting - we can all understand that you're anxious for resolving this irritation, but I bet you prefer helpful replies to a ton of heartfelt condolences! ;-)
You can edit your own posts if you notice your last post needs more details after having hit submit.
Posts: 49
Threads: 7
Joined: Apr 2011
12 Apr 11, 01:49PM
(This post was last modified: 12 Apr 11, 08:51PM by jamz.)
(12 Apr 11, 11:11AM)flowtron Wrote: You've not told us your OS yet...
I am on vista, but this happens on all computers in my network. I think it may be my router, but I cannot understand why it would do that
Posts: 1,436
Threads: 7
Joined: Jun 2010
(11 Apr 11, 04:30PM)tempest Wrote: Does the problem persist even after updating the list from the master server (EDIT: or restarting the client)?
Please answer my question, because if that's not the case (i.e. if those additional servers disappear once you reload the list), it's just because they're stored in the client.
Posts: 49
Threads: 7
Joined: Apr 2011
12 Apr 11, 03:25PM
(This post was last modified: 12 Apr 11, 08:52PM by jamz.)
Yes, it still doesnt work when I restart
Posts: 49
Threads: 7
Joined: Apr 2011
Most of you probebly know this by now, but for the people who may experience the same problem, I HAVE A SOLUTION!!!!!!!!
It was my NAT settings. My retarded Belkin router doesnt have an option for NAT settings, but it does have a DMZ option which excludes a local computer from the NAT firewall. This fixed my problem right away.
Thanks to everyone on this forum who helped me to fix this problem :)
Posts: 3,780
Threads: 33
Joined: Jun 2010
Thank you for posting back the solution.
And yes, "retarded Belkin" is slightly redundant.
Posts: 2,136
Threads: 50
Joined: Jun 2010
Having a computer, that you might want to use, running in a DMZ is not what you might call 'safe', unless you're going to put a decent software firewall on it.
|