HELP "Assault cube fata eror COul not create server info socket"

[ONYX]

Ok I have a last one....I done open the ports...now the Info socket..Where should i find Infosocket?

[jamz]

This message means you have something using the port that's one higher than your server port. It usually happens when you already have the server running and didn't notice.

[ONYX]

I just put ports 12908 UDP...Is that high?

[jamz]

Sorry - bad English on my part. No, 12908 is not high; you could use any value up to 65534.
What I meant was, the info port runs on the port that's (server port)+1.
If 12908 is your server port, your info port is 12909. You must forward both of these ports in your router.
However, as I said, this error usually indicates that the server is already running when you tried to start it.

[wc clan]

Open ports 28763 - 28764 All (UDP - TCP)
Or you can put other ports exemple:
4444 - 4445
5555 - 5556
22 - 23
aways open two ports, and You put first port in your server.

[Billybob]

Open ports 28763 - 28764 All (UDP - TCP)
Or you can put other ports exemple:
4444 - 4445
5555 - 5556
22 - 23
aways open two ports, and You put first port in your server.

I would suggest not using port numbers below 1025, as 0-1024 are commonly used ports or system ports.

[SELECT ALL] Code:

port 22 default for SSH (commonly used to administer many ac servers)
port 23 default for TELNET port (can be used to administer ac servers)

http://en.wikipedia.org/wiki/List_of_TCP...rt_numbers