Posts: 10
Threads: 4
Joined: Jun 2010
08 Mar 11, 11:17AM
(This post was last modified: 08 Mar 11, 11:19AM by NiNe.)
I made this lan server for me and my brother. We wanted to try some stages I downloaded, so I tried to connect as admin. First I tried "connect as admin" but I didn't make it, I thought I had set the IP wrong. So i tried setadmin, and join on the server itself, but there I understood the IP wasn't the problem, it was the password. I wrote the password 3 times, then I made a new password, which was just the key "A" then started the server again. I am pretty sure I know how A is writtin, but the server kicked me again! WHAT THE F***!!?
I use a mac and the server is set up on the start up of assault cube. I have set the admin password there. Please help me :'(
Posts: 156
Threads: 7
Joined: Jun 2010
08 Mar 11, 11:28AM
(This post was last modified: 08 Mar 11, 11:29AM by Billybob.)
How did you set the password? did you use the -x switch?
Quote:// -x // adminpasswd, don't use, use serverpwd.cfg instead
add -Cconfig/servercmdline.txt to your bat/sh file and use the config/serverpwd.cfg file instead. Using this file you do not need to reboot to add new passwords too.
EDIT: Just saw that you use a mac, i dont know if its the same for mac.
Posts: 10
Threads: 4
Joined: Jun 2010
08 Mar 11, 11:33AM
(This post was last modified: 08 Mar 11, 11:42AM by NiNe.)
In mac you just fill in the spaces, I know windows got a comand thing there.
On the mac it looks something like this:
Name:
ServerPassword:
AdminPassword:
Max Clients:
Advanced Options:
(start)
I read in the console right this after starting the server:
Read 0 admin passwords from 'config/serverpwd.cfg'
This was written in the Serverpwd.cfg:
// list of additional server admin passwords
// WARNING: You can NOT use CubeScript in here!!
// one password per line
// Use the following scheme...
// password [denyadmin]
// optional: if denyadmin is set to '1', the password can only be used to connect to the server in case of ban, not to claim admin
Posts: 1,981
Threads: 63
Joined: Jun 2010
08 Mar 11, 11:49AM
(This post was last modified: 08 Mar 11, 11:50AM by Luc@s.)
try adding your password on a new line in serverpwd.cfg, instead of filling "ServerPassword" as billybob said
Posts: 10
Threads: 4
Joined: Jun 2010
08 Mar 11, 11:56AM
(This post was last modified: 08 Mar 11, 11:57AM by NiNe.)
Do I have to use // in the start of the password? Could you give and example? I'll try my best on my own till I get an answear. A little complicated as I have never worked with comandlines before, if you could call it that :P
Yes, it worked. Thanks for the help guys ;)
Posts: 1,823
Threads: 20
Joined: Jun 2010
For the future, // is only for COMMENTS. Which means, anything that starts with // will be ignored.
Posts: 10
Threads: 4
Joined: Jun 2010
yeah, I kinda figured that out :P but thanks anyways
