How do I enable this for my server?

How do I enable this for my server? - Printable Version

+- AssaultCube - Forum (https://forum.cubers.net)
+-- Forum: AssaultCube (https://forum.cubers.net/forum-3.html)
+--- Forum: Help! (https://forum.cubers.net/forum-10.html)
+--- Thread: How do I enable this for my server? (/thread-1563.html)

Pages: 1 2

How do I enable this for my server? - fox_ares - 24 Nov 10

I want other ppl do be able to ban, send custom maps, and coop in my server. how do I enable?

P.S. I AM USING A MAC!!!

RE: How do I enable this for my server? - KoOsH - 24 Nov 10

(24 Nov 10, 09:00PM)fox_ares Wrote: I want other ppl do be able to ban, send custom maps, and coop in my server. how do I enable?

P.S. I AM USING A MAC!!!

I can't help you there, but I have an awesome map for a server to take. Can I put it on your server?

RE: How do I enable this for my server? - fox_ares - 24 Nov 10

(24 Nov 10, 09:17PM)KoOsH Wrote:
(24 Nov 10, 09:00PM)fox_ares Wrote: I want other ppl do be able to ban, send custom maps, and coop in my server. how do I enable?

P.S. I AM USING A MAC!!!

I can't help you there, but I have an awesome map for a server to take. Can I put it on your server?

I would let u, but my server wont accept maps, even if ur admin... but meet me in the Q-b r00t :: Coopedit server

STILL GUYS, I NEED HELP!!

(24 Nov 10, 09:17PM)KoOsH Wrote:
(24 Nov 10, 09:00PM)fox_ares Wrote: I want other ppl do be able to ban, send custom maps, and coop in my server. how do I enable?

P.S. I AM USING A MAC!!!

I can't help you there, but I have an awesome map for a server to take. Can I put it on your server?

nvm, meet me in the |FOX| Clan server

RE: How do I enable this for my server? - ärkefiende - 24 Nov 10

Read carefully: http://assault.cubers.net/docs/commandline.html#serverswitch

Next time, please read the docs (they are even in your game directory).

RE: How do I enable this for my server? - fox_ares - 24 Nov 10

I STILL DONT UNDERSTAND!!!!

RE: How do I enable this for my server? - JGAN - 24 Nov 10

what dont you understand :/

n00b haha ;)

RE: How do I enable this for my server? - fox_ares - 24 Nov 10

ugh, ok I have the -x(pass) in there, can someoen tell me all I type to let ppl ban, sendmaps, and coop?

RE: How do I enable this for my server? - Billybob - 24 Nov 10

Read the part about the -P switch and the -M switch in the server switches section,

ie
-P kbe means kick, ban and coop can be voted by non-admin
-P KBE means kick, ban and coop can only be voted by admin

also you will need to make a dir called incoming inside the /assaultcube/packages/maps/servermaps/ folder to receive the maps uploaded to the server.

RE: How do I enable this for my server? - fox_ares - 24 Nov 10

OK, I got the ban, kick, and coop for ppl. but now I just dont understand how to let people send maps. here is wat I want:
sending maps (everyone), updating maps (admin), reverting maps (admin), and deleting maps (admin).

RE: How do I enable this for my server? - Gibstick - 24 Nov 10

Use the -M switch for sendmap permissions, same scheme as the -P switch.
c is create a map
u is update a map
d is delete a map
You'll probably want -McuD

RE: How do I enable this for my server? - fox_ares - 24 Nov 10

It still wont let me upload maps!!! >=( And there was already an "Incoming" folder in the "Servermaps" folder... >=(

RE: How do I enable this for my server? - #M|A#Wolf - 24 Nov 10

Write here exactly what you typed for the commandline.

RE: How do I enable this for my server? - fox_ares - 24 Nov 10

P.S. It wont even let me drag .cgz maps into the folders!!

RE: How do I enable this for my server? - Gibstick - 25 Nov 10

Fix your read/write permissions!

RE: How do I enable this for my server? - fox_ares - 25 Nov 10

(25 Nov 10, 12:08AM)Gibstick Wrote: Fix your read/write permissions!

HOW DO I DO THAT?!?!

RE: How do I enable this for my server? - Gibstick - 25 Nov 10

Not familiar with Mac. There's probably a terminal command for that but I don't know it.

RE: How do I enable this for my server? - V-Man - 25 Nov 10

* V-Man shakes head
Macs may be easy to use, but they aren't easy to own.

RE: How do I enable this for my server? - fox_ares - 25 Nov 10

So does anyone know how I can fix my read/write perms?

RE: How do I enable this for my server? - JGAN - 25 Nov 10

yup. superglue/duct tape :D

hold on this geek is looking into it :3

alright attempt this in terminal:

[SELECT ALL] Code:

cd /Applications/Assaultcube.app/Contents/gamedata/packages/maps

[SELECT ALL] Code:

sudo chmod -R 777 servermaps

try to sendmap now

RE: How do I enable this for my server? - Ronald_Reagan - 25 Nov 10

Ok, the problem isn't read/write. I can tell you that.
Fox_Ares, tell us exactlly where you are putting these commandline options in. Is it in the launter? or servercmdline.txt? From experience, I have found that the options in the launcher doesn't work except for the -C switch (points the server to where it gets its commandline options). Tell us what your server log says when you try to send a map.
From looking at your last post, make sure that your serverpwd.cfg file looks like this:

[SELECT ALL] Code:

n4v3Kin

39dlz3

3klnx

For the three passwords n4v3Kin, 39dlz3, and 3klnx.
I could do

Quote:/setadmin 1 n4v3Kin

to claim admin

RE: How do I enable this for my server? - fox_ares - 25 Nov 10

On my mac, Im in the server tab, and I put them into the Advanced Options bar. The ban and coop mode for ppl to do works there, but just the maps wont be sent, and cant put them in a folder

RE: How do I enable this for my server? - JGAN - 25 Nov 10

also, he has no access to terminal so

(25 Nov 10, 01:18AM)JGAN Wrote:
[SELECT ALL] Code:
cd /Applications/Assaultcube.app/Contents/gamedata/packages/maps
[SELECT ALL] Code:
sudo chmod -R 777 servermaps

wont work :/

RE: How do I enable this for my server? - Ronald_Reagan - 25 Nov 10

Put the options in servercmdline.txt
You really should know all this before hosting a server though.
To find servercmdline.txt, go to your AC app, right click (control click) and click "Show Package Contents" Then go to contents>gamedata>config>servercmdline.txt
If that doesn't make sense, then I'd seriously reconsider hosting a server. In that file, it is very well documented on the different switches, spend your time and set them up. Then go to serverpwd.cfg and add the passwords there. -x is outdated and really -X should be the only switch used (it points to a pwd file) although you dont need to set it if your using the default file.

RE: How do I enable this for my server? - fox_ares - 26 Nov 10

dude im 12, could u plz EXPLAIN more!? (Im real smart for a 12 yr old, I will understand most u say)

RE: How do I enable this for my server? - Ronald_Reagan - 26 Nov 10

As I said, if you dont under stand what I was saying, you probably shouldn't host a server. Did you get through the first part at least?

RE: How do I enable this for my server? - fox_ares - 26 Nov 10

yup yup! found those Txt files

RE: How do I enable this for my server? - Ronald_Reagan - 26 Nov 10

Oh :)
Good.
So inside those txt files its pretty well documented. Do you have the correct switches enabled?

RE: How do I enable this for my server? - V-Man - 26 Nov 10

"switch" refers to "command-line extension," the text in a batch or sh file that is added after telling the file to execute the client binary. For instance,

[SELECT ALL] Code:

ac_server.exe -T

in this example, "-T" is the extension, or switch, which in this case causes the server to put time stamps on all logs.
The main page for the docs can be found here: http://assault.cubers.net/docs/
The documentation for command-line extensions can be found here: http://assault.cubers.net/docs/commandline.html

RE: How do I enable this for my server? - fox_ares - 26 Nov 10

how do I enable them?

RE: How do I enable this for my server? - Gibstick - 26 Nov 10

Just add it on a new line.
-T
-mcuD