Posts: 11
Threads: 3
Joined: Aug 2018
Hi,
I have a server running and it is stuck at the message:
looking up ms.cubers.net:28760...
It gives no response.
I connected manually:
/connect 185.31.230.148 28763
That works fine. So port forwarding is OK.
It just doesn't get listed.
Anyone has any ideas?
Thanks!
Posts: 562
Threads: 61
Joined: Jul 2010
22 Aug 18, 06:52AM
(This post was last modified: 22 Aug 18, 06:54AM by vonunov.)
Is it Linux? Look in the /etc/resolv.conf and make sure it has a DNS server to look up masterserver address.
It looks like the home ISP though, isn't it? On Windows maybe you would need to check if 'nslookup ms.cubers.net' succeeds. It should have the DNS configured already of course.
Posts: 11
Threads: 3
Joined: Aug 2018
Thanks for your response.
It is Linux. DNS is working fine. I can ping ms.cubers.net and it gives response (IP: 167.114.49.127).
Any other ideas?
Posts: 562
Threads: 61
Joined: Jul 2010
Is it hosted at home? You might need to try disabling the firewall in the router, then if it works you'll know you only need to make some firewall rules.
Posts: 11
Threads: 3
Joined: Aug 2018
Yes it is hosted at home.
Fact: I can connect using the command: /connect 185.31.230.148 28763
Do you agree that port forwarding and firewalls are not the issue?
FYI, I tried without firewall, but no success.
Posts: 562
Threads: 61
Joined: Jul 2010
22 Aug 18, 05:28PM
(This post was last modified: 22 Aug 18, 05:29PM by vonunov.)
Yeah, and with the normal configuration, such a firewall shouldn't interfere with a connection starting from inside anyway, but it was all I could think of. You already said you could ping it, so that was probably pointless anyway. I think I missed this somehow.
I don't know, try verbose and see if it gives you more information
-V
Verbose mode. This enables additional log messages to be printed, including the server configuration files after parsing. Using this argument twice will also enable logging of DEBUG messages. Be careful as your logs will show a part-obscured version of the serverpwd.cfg file.
Posts: 299
Threads: 14
Joined: Jul 2010
Your server was banned in 28.11.2017, because it had only 1 map in maprot. I just removed the ban, but please follow the rules:
https://wiki.cubers.net/action/view/Central_blacklist
Posts: 11
Threads: 3
Joined: Aug 2018
Ah OK, thanks! I see it is working now.
Posts: 11
Threads: 3
Joined: Aug 2018
29 Aug 18, 05:22PM
(This post was last modified: 30 Aug 18, 07:24PM by TheUniverse.)
Now it is not working any more. Is it banned again?
I made a new thread for this, because i got no replies here.
https://forum.cubers.net/thread-8981.html