02 Aug 10, 06:40AM
Alright turns out that with the masterserver down, things are different. When you go to port mapping and enter the ports, you need to enter your local IP address, which should be static. To make it static, go to Airport Utility>Internet>DHCP . Then check your DHCP Ending Address and choose a IP address outside of that range. For example, if my Ending Adress is 10.0.1.200, I would pick 10.0.1.201. That number will be your IP address. Go to System Prefernces>Network and select your connection. CLick Advanced, and then TCP/IP. . Click the drop-down menu under Configure IPv4 and select Using DHCP with manual address. In the box, enter the IP address you just picked. Click OK, then Apply. Then go to Airport Utilty>Advanced>Port Mapping. Click the AC service, then hit Edit. For the IP address, enter your local IP, which is the one you just used in System Preferences. Click Continue>Done then go to IPv6 . Make the IPv6 Mode->Router . Then click IPv6 Firewall and add a new exception by hitting the + . Enter your description, and then your local IP address. The TCP and UDP ports should be 28763-28764 . Click Done, then Update. Follow the rest of the tutorial that goes through the AssaultCube Launcher.
Good luck,
JGAN
Good luck,
JGAN